|
Carbon Steel Belts | Colzani TRANSBANDA 20500 |
CHARACTERISTICS
AND DIMENSIONS
Physical and mechanical properties (Typical values)
|
|
TRANSBANDA
20500
|
|
Type
|
|
Ck 67
|
|
Similar
Material
|
|
DIN 1231
|
|
Yield strength
.2 at 20ºC
|
Kg./mm2
|
110
|
|
Tensile
strength 20ºC
|
Kg./mm2
|
130
|
|
Hardness
|
Rockwell
C
|
39-41
|
|
Modulus of
elasticity
|
Kg./mm2
|
20.500
|
|
Thermal
contuctivity
|
Kcal./m.h.ºC
|
44
|
|
Specific heat
|
Cal/ºC
|
0.12
|
Transbanda
20500 is similar to: Sandvik 1300
C / Berndorf Band Carbo 13
Weights per meter and dimension
|
TRANSBANDA
20500
Carbon steel belts
|
|
(MM.)
|
0.6
|
0.8
|
1.0
|
1.2
|
1.4
|
|
100
|
0.48
|
0.63
|
0.79
|
|
|
|
200
|
0.95
|
1.26
|
1.57
|
|
|
|
300
|
1.42
|
1.89
|
2.36
|
|
|
|
400
|
1.89
|
2.52
|
3.14
|
|
|
|
500
|
2.36
|
3.15
|
3.93
|
|
|
|
600
|
2.84
|
3.78
|
4.72
|
5.66
|
6.60
|
|
700
|
|
|
|
|
|
|
800
|
|
5.03
|
6.28
|
7.55
|
8.80
|
|
900
|
|
|
|
|
|
|
1000
|
|
|
7.85
|
9.43
|
11.00
|
|
1100
|
|
|
|
|
|
|
1200
|
|
|
9.43
|
11.31
|
13.20
|
|
1300
|
|
|
|
|
|
|
1400
|
|
|
|
|
|
|
1500
|
|
|
|
|
|
|
1550
|
|
|
|
|
|
Belts can be welded at our works before dispatch or in site when the
belt is installed. Transverse welded seams can be performed at right
angles or at sloping angle to the edge of the belt.
Steel belts can be joined by means of rivets. For belt thickness 0,6 mm
rivet diameter is 2,7 mm or 4,8 mm on request. For belt thickness over
0,6 mm, the rivet diameter is 4,8 mm. Both carbon and stainless steel
belts can be supplied with perforations. For continuous drying,
cooling, cooking and dehydration, perforated belts are available with
open areas up to 40% of the total surface.
|
 Print
|
|
-
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
|
|
Enter
Tel./Fax: (5411)
4911-0077/8970
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it